What developer do I use with Wella T18?
Mix 1 part Wella colorcharm toning color with 2 parts 10 or 20 volume Wella colorcharm developer. Apply to towel dried hair then, develop for up to 30 minutes. Check frequently to see if desired results are achieved. You can customize the toner formula by intermixing shades.Should I use 10 or 20 developer with T18 toner?
Always use 20 volume. It may take a little longer but your hair will thank you for this. Once lightened to a pale yellow, you can use the 10 volume with the Wella Colorcharm toners.Is 20 or 30 developer better for toner?
The rules for developer choice when using regular hair color are as follows: Use 10 Vol developer for level on level hair coloring, toning and tone-down coloring. Use 20 Vol developer for lifting by 1-2 levels, for grey hair coverage and toning. Use a 30 Vol developer for lifting by 2-3 levels.What level is Wella T18 required for?
T18, on the other hand, is Lightest Ash Blonde with only a violet base. Violet cancels out yellow while blue cancels out orange. If you have any orange left in your hair, T14 is probably the best for your hair over T18. T18 is only effective if your hair is a level 10 or higher (purely yellow).He used BLOND ME & Fiber plex and he is NOT happy 😳 , WHY ???
Can I use 10 volume developer with Wella t18?
Your toner must be mixed with developer. Developer (also called peroxide) activates the toner - without it your toner won't work. It is recommended to use 20 Vol Developer with Wella Toners, but you can also choose to use 10 Vol Developer if that suits you better.What happens if I use 20 developer instead of 30?
Here are the rules for developer choice when going lighter using regular professional color: Use 20 Vol if you are aiming for a 1-2 level lift. Use 30 Vol is you are aiming for a 2-3 level lift. Use 40 Vol if you are aiming for a 3 level lift and if the hair is particularly difficult to color.Can I use 30 volume developer with Wella T18 toner?
It is not recommended to use a 30 volume developer with Wella T18. You are advised to use their 20 volume developer. Using anything else would void any responsibility on Wella for your results.Will toner with 20 vol lift?
20volume will give 1-2 levels of lift when used with permanent hair color. It is the standard developer for grey coverage, however, a stronger developer may be needed for more resistant hair types. 20 volume should not be used as a developer for toner or glazes especially when wanting to maintain a natural base.What happens if you use 20 volume developer instead of 10 for toner?
10 volume will allow the toner to deposit more color, 20 volume will deposit less. Once you decide which toner shade and developer you will use, measure using a hair color measuring cup and mix 1 oz.What is Wella t18 best for?
Wella T18 is packed with purple pigments, which will neutralise those yellow tones and leave you with an icy blonde result. The Wella T18 Toner is the only toner of the range that's purple based and it's the most powerful at combatting yellow tones.How long does it take to tone your hair with Wella t18?
Mix the toner with developer (either 20 or 10 Vol) - using an applicator bottle is the easiest way to mix and apply your toner. Apply your toning mixture using a tint brush to damp, towel dried hair. Leave on for up to 30 minutes and rinse out.Why is my hair still yellow after toning?
There's two reasons why your hair is still brassy after toning or colouring. Either the undertone of the toner/colour is wrong, or the product is too light for you.Can you tone your hair twice with t18?
You can, but why would you? Not only are you needlessly adding more processing to the hair, but you're also running the risk of over toning it and ending up with something too ashy/greyish. Try using a purple toning shampoo or conditioner instead, if you want to tone twice in the same day.What happens if I mix T14 and T18?
So instead of canceling out yellow/orange tones, the mixture might turn your hair a shade of purple instead. It's also very difficult to get even results by mixing hair toners. So while you can technically mix Wella T14 and T18 together as it won't “damage” your hair, the results are certainly uneven and unpredictable.How long do you leave toner on with 30 developer?
30 minutes,test on a piece of hair first of hair first.. Color only processes for so long,when it's done it's done.Should I shampoo my hair after toner?
The general rule of thumb is to wait at least 24 hours before washing your hair after toning. This allows the toner to fully set and develop, resulting in a more vibrant and long-lasting color. However, some hair experts recommend waiting up to 48 hours before washing to ensure maximum results.Is 30 volume developer too harsh?
Thirty volume should never be used for basic deposit only color as it will blast the cuticle for no reason. When used with bleach and foils 30 volume works fast and may incur the risk of over-processing. This developer is more ideal for open-air processing which incubates less heat.Is it okay to just use 10 developer instead of 20?
If you have 25% grey hair or less than 10 Vol will be OK. But once again, the fact that 10 Vol developer does not penetrate deeply into the hair cuticle will penalise your end result. For more than 25% grey hair, we recommend 20 Vol rather than 10 Vol.Does 30 developer make hair lighter?
30 volume developer (9% peroxide)Lightens up to 3 levels. Used for dyeing and also for lightening hair. Suitable for coloring grey hair. The most often it is mixed with permanent color and lightening cream or powder.